SnapSense NB-IoT sensorer
Plug-and-play overvågning af døre, temperatur, fugt og niveau.
Contact us todayReal-time monitoring
Linked with lock events
Smart alerts
CER/NIS2 compliance
Real-time door monitoring
Know the exact status of every door — open or closed — at all times. NB-IoT sensors report instantly without gateways.
Lock event correlation
Sensor data is automatically matched with lock events. Unmatched openings are flagged as potential unauthorized access.
Smart alerting
Configure alarm rules for unauthorized openings, tamper detection or doors left open. Reduce false positives with intelligent filtering.
Compliance-ready reporting
Export event logs, incident timelines and audit trails. Ready for CER and NIS2 documentation requirements.
How SnapKey Sensors work
Install
Mount the NB-IoT sensor on the door. Plug-and-play — no wiring or gateway needed.
Monitor
The sensor reports door open/close events in real time. Data is combined with lock events in the dashboard.
Alert
If an unauthorized opening is detected, alarms trigger instantly. Smart rules reduce false positives.
Report
Export event logs, incident timelines and compliance reports. Ready for CER/NIS2 audits.
Typical use cases
Critical infrastructure
Monitor access to substations, pump stations and telecom sites. Full traceability for CER/NIS2.
Warehouses & logistics
Detect unauthorized door openings after hours. Link with lock events for clear cause and effect.
Offices & common areas
Know which doors are left open. Get alerts before it becomes a security issue.
Configure once, monitor always
Set up sensors, alarm rules and notification thresholds in the dashboard. Changes apply immediately.
Assign sensors to doors and locks
Configure alert rules and thresholds
Set arm/disarm schedules
Manage notification recipients
Auto-disarm on authorized unlock
Insights when it matters
Real-time door status, incident timelines and activity analytics — all in one place.
Live door open/closed status
Incident timeline with linked lock events
Battery and signal health monitoring
Activity analytics by time of day
Export compliance reports
Det får du med SnapKey Sensors
Registrering af dør åben/lukket
IoT-sensorer registrerer præcist, når en dør åbnes eller lukkes – både ved autoriseret oplåsning og uautoriserede forsøg.
Koblet med låsedata
Sensorinformation kombineres med SnapKeys log over lås/oplås-hændelser, så du altid ved, hvorfor og hvordan døren blev åbnet.
Advarsler ved åben dør
Få øjeblikkelige advarsler, hvis en dør står åben for længe – reducerer risiko for indtrængen eller driftsstop.
Indbrudsdetektering
Når uautoriserede åbninger registreres, kan systemet udløse alarmer og logge hændelsen til videre undersøgelse.
Fuld dokumentation & compliance
SnapKey Sensors gør det let at leve op til CER og NIS2 ved at dokumentere alle adgangshændelser med tid, dato og årsag.
Frequently asked questions
No. SnapKey Sensors use NB-IoT (cellular) and are completely wireless. Just mount and they connect automatically.
The system matches door open/close events with lock/unlock events by time and location. Unmatched openings are flagged as unauthorized.
Yes. You can configure alarm rules that trigger on unauthorized openings, tamper alerts, or doors left open too long.
NB-IoT sensors typically last 3-5 years on a single battery. The dashboard monitors battery levels and alerts when replacement is needed.
Yes. Full event logging, audit trails and exportable reports make it straightforward to document access control for CER and NIS2.
Full control over every access point
Combine lock events with sensor data for complete door monitoring. Real-time alerts, compliance reports and actionable insights.
Contact us today